I noticed that above the footwells on my coupe there are moulded locating lugs and holes for fir tree clips that look like they were designed to retain a moulded trim panel (on the current jags they are made from pressure-pressed cloth). I mean the trim cover where the footwell lamp would normally clip, that would have a cut out for vents and the ODBII port, etc., often called a lower fascia cover. However mine has no trim panels on either side. I can't find any in the parts catalogue, so is this something they designed in but later decided not to include on the F-Type, or am I missing some trims?

 

No trim panels on mine either.
Passenger side:





Seems like there should be a trim panel there.

 

If you sit in either seat and lift your foot up, do your toes hit a trim piece closing off under the dash or can you touch the wiring and modules with your feet?

I have circled in green the moulded supports with holes that were clearly designed to support fir tree clips holding a trim piece to close the void. There are also moulded supports behind the pedals. The workshop manual shows the trim missing as it is in my car so I suspect it was designed out before launch but just wanted to check it's not just mine.

 

Thanks for checking Unhingd, I'm glad it's not just mine.

 

I don't have them either. You beat me to it, I was gonna ask the same question...