XJ XJ6 / XJR6 ( X300 ) 1995-1997

Drivers rear floorboard

Thread Tools
 
Search this Thread
 
Old Sep 3, 2016 | 06:23 PM
  #1  
Brandon Wright's Avatar
Thread Starter
|
Member
Joined: Aug 2016
Posts: 31
Likes: 8
From: Florida
Default Drivers rear floorboard

I realize this may be a dumb question but... Is there supposed to be a hump in the drivers side rear floorboard?
 
Reply
Old Sep 3, 2016 | 09:49 PM
  #2  
caldercay's Avatar
Senior Member
Joined: Jun 2011
Posts: 307
Likes: 68
From: Cypress, TX
Default

You mean, other than the center hump? Not sure I follow - mine does not, to my knowledge.

Do you mean on the floor where the rear passenger would place their feet?
 

Last edited by caldercay; Sep 3, 2016 at 09:52 PM.
Reply
Old Sep 4, 2016 | 04:04 PM
  #3  
Brandon Wright's Avatar
Thread Starter
|
Member
Joined: Aug 2016
Posts: 31
Likes: 8
From: Florida
Default

Originally Posted by caldercay
You mean, other than the center hump? Not sure I follow - mine does not, to my knowledge.

Do you mean on the floor where the rear passenger would place their feet?
Yes the actual footwell has a hump.
 
Reply
Old Sep 6, 2016 | 11:46 PM
  #4  
Jagboi64's Avatar
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2013
Posts: 5,250
Likes: 3,509
From: Calgary, Canada
Default

The steel is flat, however there is an air duct that runs under the front seats and exits through the carpet approximately at the back of the front seats. Could that be what you mean?
 
Reply
Old Sep 7, 2016 | 07:06 AM
  #5  
Brandon Wright's Avatar
Thread Starter
|
Member
Joined: Aug 2016
Posts: 31
Likes: 8
From: Florida
Default

Originally Posted by Jagboi64
The steel is flat, however there is an air duct that runs under the front seats and exits through the carpet approximately at the back of the front seats. Could that be what you mean?
Well I removed the carpet to get a better look and the steel is warped or it has a bow almost as if it's been pushed up from the underside of the car however there is nothing under the car that would indicate that.
Basically I just wanted to know if that was supposed to be there or not.
Since its obviously not I'm thinking of taking a rubber mallet and putting it back in place. Any other suggestions would be great. I'll try to get some pictures uploaded today
 
Reply
Old Sep 7, 2016 | 11:58 AM
  #6  
Jagboi64's Avatar
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2013
Posts: 5,250
Likes: 3,509
From: Calgary, Canada
Default

Here is a photo of my XJR with the interior stripped out. This is looking toward the rear. The raised piece at the bottom of the photo is the support for the front seat.
 

Last edited by Jagboi64; Sep 7, 2016 at 12:00 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
springer
XJ6 & XJ12 Series I, II & III
5
Apr 22, 2016 11:05 AM
Johnken
XK8 / XKR ( X100 )
0
Apr 14, 2016 12:34 PM
silversurfer1221
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
3
Apr 6, 2016 05:26 PM
Brewtech
XJ40 ( XJ81 )
4
Aug 28, 2007 10:08 AM
X-Type ( X400 )
5
Oct 4, 2006 12:42 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:32 PM.