2010 LED Tailight Conversion Kit Updates?
Here a link for photos of 2010 tail light upgrade. Everything work as it should.
Heat generated from the load resistors about 97-105 degrees. Not bad.
http://www.flickr.com/photos/georgekale/sets/72157624889793804/
Time spent on this project about six hours. Well worth it.
Heat generated from the load resistors about 97-105 degrees. Not bad.
http://www.flickr.com/photos/georgekale/sets/72157624889793804/
Time spent on this project about six hours. Well worth it.
By the way READ THIS !! Legal Disclaimer
The information contained in this website is for general information purposes only. The information is provided by Kale Automotive and while I endeavor to keep the information up to date and correct, I make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.
George Kale
PS: I want to Thank Dan Wicker ( Nalley Jaguar) for his support.
Last edited by georgekale; Sep 7, 2010 at 07:15 PM.
Former Sponsor
Joined: Nov 2009
Posts: 139
Likes: 16
From: greenville,SC
George, fantastic job on getting the right combo of resistors! Looks great.
Let's start gathering some interest in a group buy. I'd like to sell 5 kits for the special pricing. Copy and paste the list below and add your name if interested.
1.
2.
3.
4.
5.
Let's start gathering some interest in a group buy. I'd like to sell 5 kits for the special pricing. Copy and paste the list below and add your name if interested.
1.
2.
3.
4.
5.
Junior Member
Joined: Aug 2010
Posts: 10
Likes: 0
From: Delaware
Awesome work guys! So, there is no longer a bulb failure indication anywhere and everything works correctly? If so, I would be very interested in getting this if I could find the right person in my area to be able to install this. :-/
Senior Member
Joined: Jul 2008
Posts: 180
Likes: 21
From: South Florida
I'm interested.
Junior Member
Joined: May 2010
Posts: 29
Likes: 0
From: chicago, Il
Im IN!
Thanks so much Guys Great work
Let's start gathering some interest in a group buy. I'd like to sell 5 kits for the special pricing. Copy and paste the list below and add your name if interested.
1.Sorapp
2.Chiredxkr
3.
4.
5.[/quote]
Let's start gathering some interest in a group buy. I'd like to sell 5 kits for the special pricing. Copy and paste the list below and add your name if interested.
1.Sorapp
2.Chiredxkr
3.
4.
5.[/quote]
Member
Joined: Mar 2010
Posts: 72
Likes: 0
From: Edgewater NJ
Let's start gathering some interest in a group buy. I'd like to sell 5 kits for the special pricing. Copy and paste the list below and add your name if interested.
1.Sorapp
2.Chiredxkr
3.Nytojerz
4.
5.
Im in
1.Sorapp
2.Chiredxkr
3.Nytojerz
4.
5.
Im in
Former Sponsor
Joined: Nov 2009
Posts: 139
Likes: 16
From: greenville,SC
Guys, I apologize, but it looks like there might be a delay on getting the wiring harness here that is necessary for your car. I think George got lucky on the harness that I was able to get for him - GHOSTRIDERXKR08 has had one on order with me for a couple of weeks and it still has no ETA. Since the 2010 backup lamps have a different connector, this harness is required to get the functionality of two reverse lamps.
I will keep everyone posted. Perhaps if we increase demand for this part, Jaguar will ramp up their production!
I will keep everyone posted. Perhaps if we increase demand for this part, Jaguar will ramp up their production!
Junior Member
Joined: Aug 2010
Posts: 10
Likes: 0
From: Delaware
Let's start gathering some interest in a group buy. I'd like to sell 5 kits for the special pricing. Copy and paste the list below and add your name if interested.
1.Sorapp
2.Chiredxkr
3.Nytojerz
4.CMRP
5.
1.Sorapp
2.Chiredxkr
3.Nytojerz
4.CMRP
5.
Thread Starter
|
Senior Member
Joined: Jan 2008
Posts: 806
Likes: 109
From: U.S.A.
Got my car back from Eurotoys after George's fix and now the Bulb Failure in the dash is gone. Everything is working great.
Just want to give a special thanks to George for figuring out the fix for the tail lights, the detailed instructions and all the updates. Want to also thank Dan at Nalley Jaguar for getting the reverse light harnass as quickly as he did. Thanks!
Also.....want to give a special thanks to Mike at Eurotoys who did the installation for the tail lights, reverse light harnass and all the load resistors and relays to get them working with no bulb failure in the dash. Anyone in the Chicagoland area who's looking for someone to install their 2010 LED tail lights, I would highly recommend Eurotoys.
Just want to give a special thanks to George for figuring out the fix for the tail lights, the detailed instructions and all the updates. Want to also thank Dan at Nalley Jaguar for getting the reverse light harnass as quickly as he did. Thanks!
Also.....want to give a special thanks to Mike at Eurotoys who did the installation for the tail lights, reverse light harnass and all the load resistors and relays to get them working with no bulb failure in the dash. Anyone in the Chicagoland area who's looking for someone to install their 2010 LED tail lights, I would highly recommend Eurotoys.
Last edited by GhostriderXKR08; Sep 24, 2010 at 03:31 PM.
Member
Joined: Sep 2010
Posts: 54
Likes: 1
From: Northern CA
I agree. But the other issue is access. Where to get it done if you are not down for doing the diy. Huge esthetic improvement. Why did land rover and jag wait so long to do thiS?