ABS and Knuckle replacement
Veteran Member
Joined: Oct 2006
Posts: 1,921
Likes: 65
From: UK
RE: ABS and Knuckle replacement
Thread Starter
|
Junior Member
Joined: Jan 2007
Posts: 16
Likes: 0
From: ohio
RE: ABS and Knuckle replacement
No Buck, the bearing was never removed (that I know of)and it is the ABS light, and the ABS wire is not cut. I really like the experienced members on this forum, and decided to post here. I only received (2) replieson the other forum.Do you know what codes indicate ABS. I tried to find a post from Racer, that had the OBM codes, but I could not find it.
Veteran Member
Joined: Oct 2006
Posts: 1,921
Likes: 65
From: UK
Guest
Posts: n/a
RE: ABS and Knuckle replacement
the abs sensor is part of the bearing.. If they replaced the knuckle, it should include a new bearing and that has the sensor ring built in. ... It is impossible to re-use the bearing. so there must be a new one in there.
Veteran Member
Joined: Oct 2006
Posts: 1,921
Likes: 65
From: UK
RE: ABS and Knuckle replacement
ORIGINAL: chillicop
Buck, do you know if the front end has speed sensors, or are these just in the rear spindles?
Buck, do you know if the front end has speed sensors, or are these just in the rear spindles?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
KarimPA
S-Type / S type R Supercharged V8 ( X200 )
11
Sep 12, 2015 08:15 AM
innzane
X-Type ( X400 )
0
Sep 2, 2015 10:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)