hello fellow jag owners . Am in the process of changing my imt orings because of a leak. was wondering if someone can provide me with pics and simply instructions. thanks much

 

take out 4 8mm bolts, unhook electrical connectors slip or cut off the old orings, and slip the new green orings over the back of the IMT unit and reinstall, youre done, now give me a thumbs up thankyou

 

Thanks alot guy. i managed to get the top o ring on, but am having problems with the bottom one. any ideas or technigues on removing the bottom one. it appears to be partially blocked by the throttle body.
any advice would be grateful.

 

I suggest re-reading LOL
instructions do not say to remove the valve completely.

Slip the oring on from the outside,, that is why you need to unplug the wires.

 

lol at myself. thanks guys o rings have been successfully changed. Except that i broked a screw while tightening. Of to the hardware to find a match.

 

Too funny!