Vacuum Pump hose connections
Thread Starter
|
Junior Member
Joined: Feb 2015
Posts: 16
Likes: 0
From: UK
Vacuum Pump hose connections
Hi All,
I had a solenoid on the vacuum pump go and decided to replace the complete part (old one rusty). However the new unit has one hose that my old one didn't seem to have (it could have come off). The tube is a black rubber one with a white stripe the full length.
I have installed the unit but without the tube with stripe. Does anyone know where this pipe connects to. Looked in Jaguar w/s manual which describes where all other pipes go but not that one.
http://www.applelodge.net/pics/Vacuu...p%20edited.jpg Here is a pic.
Hopefully someone will know
John
X Type. 2.0d 53 plate
I had a solenoid on the vacuum pump go and decided to replace the complete part (old one rusty). However the new unit has one hose that my old one didn't seem to have (it could have come off). The tube is a black rubber one with a white stripe the full length.
I have installed the unit but without the tube with stripe. Does anyone know where this pipe connects to. Looked in Jaguar w/s manual which describes where all other pipes go but not that one.
http://www.applelodge.net/pics/Vacuu...p%20edited.jpg Here is a pic.
Hopefully someone will know
John
X Type. 2.0d 53 plate
Last edited by JohnJonesXtype; May 31, 2018 at 07:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post
new mexico
XJ6 & XJ12 Series I, II & III
5
Apr 29, 2017 02:28 PM
ℬℒᏦ_ℙℕᏆℋℛ84
XJ6 & XJ12 Series I, II & III
3
Dec 19, 2014 12:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)