Chip/Programmer for 2018 v6 SuperChared XJL Portfolio?
__________________
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.
Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
Yep.
Lots of happy VAP customers particularly on the F-Type sub-forum.
Their products are based on many hours of R&D and their after-sales service is great.
I put their Stage 2 tune - larger crank pulley & tune - on my F-Type some four years ago now and it has performed flawlessly.
They now have a Stage 3 tune, same larger crank pulley plus a new smaller SC pulley + tune, taking it to 475 hp and 430 ft/lb, see here: https://www.velocityap.com/product/3...26-ecu-tuning/
Highly recommended!
Lots of happy VAP customers particularly on the F-Type sub-forum.
Their products are based on many hours of R&D and their after-sales service is great.
I put their Stage 2 tune - larger crank pulley & tune - on my F-Type some four years ago now and it has performed flawlessly.
They now have a Stage 3 tune, same larger crank pulley plus a new smaller SC pulley + tune, taking it to 475 hp and 430 ft/lb, see here: https://www.velocityap.com/product/3...26-ecu-tuning/
Highly recommended!
We have the fastest XJ , Xjr , xj575 to date, our tune gained of around 130-145 hp on stock 5.0 XJSC and done with good amount of safety margin
https://youtu.be/iFGSNntEe38
https://youtu.be/iFGSNntEe38
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)










