To polybush or not?
#1
#2
Not on the X300.
I have used them on the "older Jags", with mixed results.
The XJ-S got them on the lower inner arms, upper inner arms, and 2 days later "out they came", toooooo harsh.
I have only used metalastic OE since then in those areas.
I do use them on the sway bar "D" area, and I get NO squeeking, but some do report that noise.
I have used them on the "older Jags", with mixed results.
The XJ-S got them on the lower inner arms, upper inner arms, and 2 days later "out they came", toooooo harsh.
I have only used metalastic OE since then in those areas.
I do use them on the sway bar "D" area, and I get NO squeeking, but some do report that noise.
#3
#4
Join Date: Mar 2008
Location: Pacific Northwest USA
Posts: 24,743
Received 10,757 Likes
on
7,101 Posts
At least using them in the upper arms means it isn't too hateful to try something else if you don't like the results.
My own past experience, and the experience of many others, with poly bushings is mixed. IMHO there's just too much labor involved to experiment. In my younger days it was a different story :-)
Cheers
DD
My own past experience, and the experience of many others, with poly bushings is mixed. IMHO there's just too much labor involved to experiment. In my younger days it was a different story :-)
Cheers
DD
#5
Thread
Thread Starter
Forum
Replies
Last Post
FS[UnitedKingdom]: FOR SALE 1996 Jaguar XJS Celebration Coupe Supercharged !
Hippy
PRIVATE For Sale / Trade or Buy Classifieds
1
07-21-2015 10:21 PM
FastKat
XJ6 & XJ12 Series I, II & III
7
06-27-2014 01:46 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)