If My Fuel Pump Has Failed Wont I Get a Code or something?
No! If you had a failing fuel pump, you MIGHT get a lean run engine code, but there is no fuel pressure sensor to tell the ecu that pressure has failed. There is, however, a good test port on the X-308 to measure the pressure with a test gauge.
I can confirm that, shocking as it is, no code is thrown when a fuel pump fails.
I was cruising along at 60 MPH on a country road when, suddenly - pfffffft - I applied the accelerator and had no power and coasted to a stop. I carry an OBD-II code reader with me and there were none.
It was only after ruling out a wide number of other possible causes for "sudden engine stop" syndrome that it was determined to be fuel starvation secondary to a dead fuel pump.
I was cruising along at 60 MPH on a country road when, suddenly - pfffffft - I applied the accelerator and had no power and coasted to a stop. I carry an OBD-II code reader with me and there were none.
It was only after ruling out a wide number of other possible causes for "sudden engine stop" syndrome that it was determined to be fuel starvation secondary to a dead fuel pump.
Thread
Thread Starter
Forum
Replies
Last Post
deanh
XF and XFR ( X250 )
3
Sep 6, 2015 08:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



