2000 xj8 x308
I recently had some body work done on lower front body passenger side by the wheel arch now my front window dose not work from switch but it works from drivers side master switch. Things I have done so far changed switch door module did not work so change them back to original ones changed fuse #15 25 amp as it was blown still not working any ideas would be appreciated thanks jrb53

 

Sometimes a hard battery reset is all it takes: pull negative cable and touch to positive post: drains capacitors and resets

 

Doing a hard reset is a must when the door module has been unplugged. All of the door modules are the same part number, so they have to relearn their position via the reset.

 

Thanks for your reply’s I have done hard reset every time I have tried something I have power to the switch so must be a brake in the wiring I’m going to have it checked out with an auto electrician will post more when I find the problem thanks

 

Check the fuses rear heel board both sides
If all working fine probably the switch itself not working

 

Yes, power at the switch doesn't mean the switch is good.