I suffered a problem of pulling to one side which turned out to be a sticky solenoid in the Teves ABS unit. I replaced the complete unit using one from an XJ6 and the system is now wonderful. HOWEVER the ABS light is now staying on all of the time. We bled the LP side at the accumulator (no bubbles) and the rear and front brakes as per Teves instructions. Any thoughts?

 

maccasa,

Good to hear that the ABS valve block change was successful. Perform the Blink Test routine and see what codes are stored in the ABS.

Good luck

Paul

 

Any particular year so we can attempt to figure out which Teves ABS system you're referring to?