Fuel pipe flat
Thread Starter
|
Veteran Member
Joined: Sep 2015
Posts: 1,565
Likes: 477
From: Yorkshire U.K.
Fuel pipe flat
Hi all, I’ve noticed a bit of a flat spot on my fuel pipe supply. I must have done it when I pushed it through the firewall. As I say it’s on the supply side. Question is will it need cutting out or is there enough pressure that it won’t matter? Thanks
Veteran Member
Joined: Jan 2012
Posts: 14,600
Likes: 10,795
From: France
Brinny
Either post a photo, or do a flow test by hotwiring the pump and seeing what volume comes out of the supply in 2 minutes, say, and ten calculating the volume per hour or whatever. Basically, extra joins are not a good idea in a hard line IMO, as vibration/knock etc etc will, at some point, loosen them.
Greg
Either post a photo, or do a flow test by hotwiring the pump and seeing what volume comes out of the supply in 2 minutes, say, and ten calculating the volume per hour or whatever. Basically, extra joins are not a good idea in a hard line IMO, as vibration/knock etc etc will, at some point, loosen them.
Greg
Thread
Thread Starter
Forum
Replies
Last Post
ln69bt
S-Type / S type R Supercharged V8 ( X200 )
46
May 26, 2018 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)