Not sure weather to persevere with my passsenger side window motor or not. I’ve cleaned the runners and re lubed them with silicon spray. The window shoots down but going up is a different story. It will go up with a lot of help but sometimes it will give up half way. Should I keep working it and hope it improves or give up the ghost and replace. It had been stood for a long long time with no use? Thanks in advance

 

You gotta get in there and pull the window motor. I have a post somewhere where I posted some pics of my effort to save my rear window motor. Its been flawless ever since.

 

Hi vee, I’ve been through your posts but can’t find anything, any chance of a link please?

 

Can the motor be removed without the regulator?

 

https://www.jaguarforums.com/forum/x...tached-162775/

 

Thanks for the link vee. I will try and get it out then go from there. Not sure if I’m upto messin* inside motors.

 

It's really not hard, nor are there many parts. Just make sure you're working on a nice worktable, where you can set the parts aside as you open it up.

 

Now sorted. Thanks for your help vee.