Wiring question.
#1
#3
The following users liked this post:
Greg in France (05-10-2016)
The following 2 users liked this post by daverb:
Grant Francis (05-09-2016),
Greg in France (05-10-2016)
#5
The following users liked this post:
Grant Francis (05-09-2016)
#6
Thanks! That's a big help. What's the reason to "disconnect from the HEI unit and remove that condenser in the amp"? I'm a novice when it comes to these cars so I'll gladly take all advise. I've read Kirby Palm's book awhile back before I bought the car and I need to re-read it now that I'm started to work on her again. I also got lucky and the repair operation manual came with the car but most of all this forum has been a big help just reading pass threads. Thanks again for the help!
#7
That condensor was originally a noise supressor for the radio on the AM band, or thats what we were told at Jaguar.
Age is now against them, so removal is the best plan.
They are connected to 1 of the +ve posts of the module, and they leak to earth, thus earthing the ignition system, then spark is lost/intermittant/whatever.
Removing them has revived a few dead V12's for me over the years. Others have run much better with it gone, so issues were on the horizon.
Age is now against them, so removal is the best plan.
They are connected to 1 of the +ve posts of the module, and they leak to earth, thus earthing the ignition system, then spark is lost/intermittant/whatever.
Removing them has revived a few dead V12's for me over the years. Others have run much better with it gone, so issues were on the horizon.
The following users liked this post:
Greg in France (05-10-2016)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)