When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I’ve been experiencing an intermittent warning: ABS light is static, parking brake warning flashes with a second static parking break warning light center (see photo). Thoughts?
Get the codes pulled, if possible. Search this forum for possible threads. Resistance-check the wheel speed sensors (course pulling codes would tell you if one was bad).
Get the codes pulled, if possible. Search this forum for possible threads. Resistance-check the wheel speed sensors (course pulling codes would tell you if one was bad).
Here they are, not that I know what they mean in the big picture…. will search threads.
It says right there, the motor output has a short to battery. Either your motor is shot or the harness going to them is damaged. It's not the motor INPUT, so that makes it easier. It's only shorted when the motor is engaged.
I think you need to download the Workshop Manual. I seriously cannot remember where that's downloadable FROM, but that will show you where/how to get the job done.
Someone else out there knows where the WSM is and will point you in the right direction!