Can someone please point me to documentation on proper jacking procedure for using 4 jack stands or share how you do it? My experience is only on my previous BMWs, and they are pretty easy to get on stands.

Thanks,
SA

 

The procedure is outlined in the vehicle Owner's Manual.

It's also outlined in the Workshop Manual. Here is a link to the Manual:

https://www.dropbox.com/s/rbas72bks4...44939.pdf?dl=0

 

Perfect, thank you!

 

Since the entire body structure of the X150 is aluminium, care must be taken whilst placing a jack under the places indicated in the Manual. Use a urethane cushion or block of wood between the jack saddle and the bodywork and cushions on the jack stand heads.

 

to the 'stickies' at the top of the threads where you will find the XK/XKR - 'How To' / DIY Repair & Maintenance thread. Under the MAINTENANCE section you will find Jacking the vehicle - axle stand points: thread:
https://www.jaguarforums.com/forum/x...solved-187308/

Graham