​​​​​​To me Ive always loved the finished look of the xk60 rear end it looks complete although I've never been a fan of the square exhaust tips at all .

The quad exhaust looks the best by far however in current state without a xkr-s rear diffuser looks quite unfinished in my opinion.

I was wondering how a xk60 rear bumper modified to accept the quad exhaust would potentially look .. interesting

 

I've always had two issues with the stock rear bumper, one I'm not fond of the way it sticks out like a step below the tail lights and hatch bottom and doesn't transition smoothly like Astons do (the plate area at least should slope to match the bumper instead of the sharp step it has) and I've thought it to be a bit too small and not low enough, leaving the rear underside more exposed than it should. I've got the R-S carbon diffuser and it only helps a little. The XK60 valance has been a favourite but agree on the square finishers.

 

"I've thought it to be a bit too small and not low enough, leaving the rear underside more exposed than it should"

My thoughts exactly to me it needs a lot more depth and fullness whilst the xkrs valance certainly does help I too have always wondered about the xk60 rear valance however also being put off by those ugly square exhaust if only they used large round tips 👌👌

However at this price if it could be modified to accommodate the quads it'd be well worth it (although it might just be easier going back to the xk rear box and fitting larger round tips)
https://www.ebay.com.au/itm/25450948...mis&media=COPY

 

Something like this might work where the square portion has infills to accommodate

the large circular tip

 

I'm more for the wide single four-pipe and a wide body.

 

Like the original prototype


🤤 🤤

 

It needs the fat butt also though.

 

chunky butt required

 

She has the best butt. I wanted to flirt with her. She has a nice BBL