XK8 / XKR ( X100 ) 1996 - 2006

Engine Failsafe Mode

Thread Tools
 
Search this Thread
 
Old Oct 13, 2018 | 11:14 AM
  #1  
Marqymarquis's Avatar
Thread Starter
|
Member
Joined: Sep 2018
Posts: 31
Likes: 5
From: Worthing West Sussex
Default Engine Failsafe Mode

On two consecutive days the “Engine Failsafe Mode” warning came up on my 1996 XK8. On the first occasion, I went for a two mile drive; parked; stopped the engine; re-started it and the warning was extinguished. The car ran correctly. On the second occasion, I left the engine running for a few seconds before switching off and re-starting. Again, the warning message was extinguised and the car ran correctly.
Any suggestions?
 
Reply
Old Oct 13, 2018 | 01:13 PM
  #2  
GGG's Avatar
GGG
Joined: Dec 2011
Posts: 120,439
Likes: 17,001
From: Durham, UK
Default

1. battery is suspect
2. read the codes

Graham
 
Reply
Old Oct 13, 2018 | 05:49 PM
  #3  
Marqymarquis's Avatar
Thread Starter
|
Member
Joined: Sep 2018
Posts: 31
Likes: 5
From: Worthing West Sussex
Default

Thanks
How do I read the codes?
 
Reply
Old Oct 28, 2018 | 09:26 AM
  #4  
zray's Avatar
Veteran Member
5 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2018
Posts: 3,645
Likes: 2,259
From: on the road in NE Oklahoma
Default

the inexpensive readers would not connect to my '02 XKR. This one works well enough to read most fault codes:

Amazon Amazon


Z.
 
Reply
Old Oct 30, 2018 | 10:49 AM
  #5  
dsnyder586's Avatar
Veteran Member
Joined: Jun 2011
Posts: 2,134
Likes: 542
From: Costa Mesa, CA
Default

Also, check the condition and fitment of your intake snorkel. I had an ill fitting one that would allow a little air in at certain times...
 
Reply
Old Oct 30, 2018 | 01:26 PM
  #6  
Johnken's Avatar
Veteran Member
Joined: Apr 2014
Posts: 5,457
Likes: 1,816
From: New Jersey USA
Default

Did you lose cruise Control too? If so look for loose hose vacuum leak near throttle.

john
 
Reply
Old Nov 4, 2018 | 06:03 PM
  #7  
tlindi's Avatar
Senior Member
10 Year Member
Liked
Loved
Joined: Nov 2012
Posts: 151
Likes: 39
Default

Originally Posted by Marqymarquis
On two consecutive days the “Engine Failsafe Mode” warning came up on my 1996 XK8. On the first occasion, I went for a two mile drive; parked; stopped the engine; re-started it and the warning was extinguished. The car ran correctly. On the second occasion, I left the engine running for a few seconds before switching off and re-starting. Again, the warning message was extinguised and the car ran correctly.
Any suggestions?
Mine (1997) had similar issues sinse 2011. Sometimes not able to start (crank ok) on P - on N staring fine. Issues and fix new (used) Gearbox rotary switchs aka Jaguar slang Range Sensor. (Functionality can be verified by measuring contact by document attached)

 
Attached Files
File Type: pdf
Rotary Switch 5HP24.pdf (172.1 KB, 69 views)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dchristy
XK8 / XKR ( X100 )
14
Aug 22, 2022 11:29 AM
R-chitect
XJ XJ8 / XJR ( X308 )
5
Mar 14, 2018 07:59 PM
TheStallion
XJ XJ8 / XJR ( X308 )
46
Mar 14, 2015 03:16 AM
rpeppers
General Tech Help
2
Oct 12, 2008 05:18 PM
dr
XJ XJ8 / XJR ( X308 )
3
Jul 2, 2008 08:48 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 01:19 AM.