I have had no other CEL's but this one when I look for any codes via my Torque app is there.

 

that is a good code - will last forever until you reset via Torque or hard reset the battery

 

P1111 is NOT a fault code - it is a status. You will always see one or the other of the following:

1. if DTC P1000 is stored in memory, the on-board diagnostic tests have not been completed.
2. if DTC P1111 is stored in memory, all on-board diagnostic tests have been completed

Graham

 

That is the one code you WANT to have on a Jag!

 

ok, good.