Replace Side Badges / Emblems
#1
Replace Side Badges / Emblems
Want to replace the left and right Jag Badges/Emblems located just to the front of the drivers/passenger doors. Changing from Green to Red Badges, they are more in line with the Phoenix Red body color. Any tricks or hints on what to look for and/or how to procced without fouling everything up, would be greatly appreciated.
#2
Bill
There's actually a cutout in the fender. Some models have lights in them. Mine was attached with two sided tape. You can pry them off with a plastic molding tool as not to scratch the paint, and then reapply, the new ones may already have the tape applied to them. If not it's available at most auto parts stores You may want to consider black also it would be a nice contrast. I agree with you as far as the green ones, just doesn't go with the red unless it's X-Mas.
There's actually a cutout in the fender. Some models have lights in them. Mine was attached with two sided tape. You can pry them off with a plastic molding tool as not to scratch the paint, and then reapply, the new ones may already have the tape applied to them. If not it's available at most auto parts stores You may want to consider black also it would be a nice contrast. I agree with you as far as the green ones, just doesn't go with the red unless it's X-Mas.
The following users liked this post:
billm (05-20-2011)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)