Jaguar Forums - Jaguar Enthusiasts Forum
0 2021/03/05 08:01:34
Notice the crumbled insulation on wires leading to and from this resister
Notice the crumbled insulation on wires leading to and from this resister
0 2021/03/05 08:01:35
New terminals compared to pigtail wire
New terminals compared to pigtail wire
0 2021/03/05 08:01:37
Connectors used for crankshaft and flywheel sensors.
Connectors used for crankshaft and flywheel sensors.
0 2021/03/16 16:39:04
0 2021/03/16 16:40:42
Ground stud for ignition harness
Ground stud for ignition harness
0 2021/03/16 16:43:40
Velcro thermo sleeve from Cool it used to protect the harness from heat.
Velcro thermo sleeve from Cool it used to protect the harness from heat.
0 2021/03/16 16:43:42
0 2021/03/30 13:18:59
0 2021/03/30 13:19:01
Left side chrome strip with the short side toward the glass. Note the rubber does not touch the glass.
Left side chrome strip with the short side toward the glass. Note the rubber does not touch the glass.
0 2021/04/15 09:48:37
This is the end view of the chrome strip that shows the channel that the seal is supposed to slide into
This is the end view of the chrome strip that shows the channel that the seal is supposed to slide into
0 2021/04/15 09:48:54
0 2021/04/15 09:48:56
End view of Rubber showing long and short side of seal
End view of Rubber showing long and short side of seal
0 2021/05/15 16:38:24
Passenger door showing short edge of seal at the top, which does not touch glass
Passenger door showing short edge of seal at the top, which does not touch glass
0 2021/05/15 16:39:46
0 2021/05/15 16:46:58
0 2021/05/15 16:50:00
#8 3/8 sheet metal screw securing seal retainer to door shell on left door
#8 3/8 sheet metal screw securing seal retainer to door shell on left door
0 2021/05/15 16:50:02
0 2021/05/15 16:50:04
#6 3/8 pan head sheet metal screw securing trim to door shell
#6 3/8 pan head sheet metal screw securing trim to door shell
0 2021/05/15 16:50:05
Seal and retainer reinstalled showing rubber curling away from glass
Seal and retainer reinstalled showing rubber curling away from glass
0 2021/05/15 17:07:01
View from opposite end
View from opposite end
0 2021/05/15 17:07:03
R/H quarter window motor with what I think are all bolts securing the motor removed
R/H quarter window motor with what I think are all bolts securing the motor removed
0 2021/05/15 17:30:57
Regulator and motor still in place
Regulator and motor still in place
0 2021/05/26 08:49:28
0 2021/05/26 08:49:30
The fourth bolt that I could not see
The fourth bolt that I could not see
0 2021/05/26 08:49:31
door glass seal as installed in the driver (left hand) door card.
door glass seal as installed in the driver (left hand) door card.
0 2021/05/26 17:29:25
cross section end view of seal on door card and a new outer seal. On my door cards, short side is against door glass where ass short side does not touch glass on outer seal installed. About 1/2" at the end is not in the track
cross section end view of seal on door card and a new outer seal. On my door cards, short side is against door glass where ass short side does not touch glass on outer seal installed. About 1/2" at the end is not in the track
0 2021/05/26 17:29:26
0 2021/05/30 17:51:52
The wire Harness after removal from the engine bay before snaking into the right footwell.
The wire Harness after removal from the engine bay before snaking into the right footwell.
0 2021/05/30 17:51:54
Triangular hole below the starter relay with rubber grommet removed
Triangular hole below the starter relay with rubber grommet removed
0 2021/05/30 17:51:55
Sound deadening removed from front of footwell rotated 180 degrees so that the part number can be seen.
Sound deadening removed from front of footwell rotated 180 degrees so that the part number can be seen.
0 2021/05/30 17:51:57
Wiring harness routed from inner fender wall across the firewall and down to run along the edge of the console.
Wiring harness routed from inner fender wall across the firewall and down to run along the edge of the console.
0 2021/05/30 17:51:58
The used harness purchased had this grommet that was missing on the original. The grommet fits where the harness passes from the foot well into the space between the inner fender well. I believe that the wiring harness chaffed through from rubbing against the hole in the inner fender well because the grommet was missing. At some point in the car's history, the right front fender was replaced. Not sure why the grommet was missing.
The used harness purchased had this grommet that was missing on the original. The grommet fits where the harness passes from the foot well into the space between the inner fender well. I believe that the wiring harness chaffed through from rubbing against the hole in the inner fender well because the grommet was missing. At some point in the car's history, the right front fender was replaced. Not sure why the grommet was missing.
0 2021/05/30 17:52:00
Wiring harness routed along the right side of the center console.
Wiring harness routed along the right side of the center console.
0 2021/05/30 17:52:01
Peeking between the back seat storage locker and with the right rear trim removed. Harness is seen routing to under the rear right quarter window regulator.
Peeking between the back seat storage locker and with the right rear trim removed. Harness is seen routing to under the rear right quarter window regulator.
0 2021/05/30 17:52:03
Right rear quarter window regulator and motor that was removed to gain access to route the harness ro remove the harness into the trunk.
Right rear quarter window regulator and motor that was removed to gain access to route the harness ro remove the harness into the trunk.
0 2021/05/30 17:52:04
I tightly wrapped all connectors and branches of the harness with green masking tape to make it easier to snake the replacement harness through the various bulkheads. Seen here is the first set of connectors that connect to the Power Resister passing by the rear quarter window glass.
I tightly wrapped all connectors and branches of the harness with green masking tape to make it easier to snake the replacement harness through the various bulkheads. Seen here is the first set of connectors that connect to the Power Resister passing by the rear quarter window glass.
0 2021/05/30 17:52:06
This photo shows the main harness, the electrical harness for the power antenna and rear lights and the vacuum hose for the ECU where each passes through a square grommet as the harnesses pass from the area of the right rear quarter window and then over the right rear wheel well.
This photo shows the main harness, the electrical harness for the power antenna and rear lights and the vacuum hose for the ECU where each passes through a square grommet as the harnesses pass from the area of the right rear quarter window and then over the right rear wheel well.
0 2021/05/30 17:52:07
This is where the harness passed from the right front footwell into the space between the inner and outer right front fender.
This is where the harness passed from the right front footwell into the space between the inner and outer right front fender.
0 2021/05/30 17:52:09
0 2021/05/30 17:52:10