Hi. I´ve bougt an illuminated Logo for my F-Type.
Also a Remote Relais to switch on the Logo, when the headlights are on.

But I need help to connect it right.

The relais has 5 ports:
V+ for the wire from the car (the positive strap from the headlight)
V- for the ground from the car
COM for the negative strap from the logo
ON for the positive strap from the logo
NC for ?
When I connect it like above, the relais is switching, also with the remote. But the logo doesn´t glow.

Has anyone an idea what I´m doing wrong?

Thank you for your help.

 

You got pictures?

 

Hi there,

I´ve found the right solution. I´ve got a wron wiring diagram. Now it works.

 

Good to hear! Feel free to show us pictures of the final result.

 

NC for No Connection.

 

Right. But in this case, it’s ‘normally closed’, as NO is ‘normally open.’ The relay shorts NC to COM when the relay is not energized, and NO is shorted to COM when it’s energized.

 

Thanks for reminding me how much I've forgotten over the ye^H^H decades ...

 

It shines very bright, so I´ve decided to switch it via remote.