F-Type ( X152 ) 2014 - Onwards

Starting Issue

Old Jan 31, 2025 | 04:07 AM
  #1  
blitzsah's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2025
Posts: 4
Likes: 2
Default Starting Issue

Hello guys,

I am looking for some help with a starting issue I'm having. I have posted the same on ftype forum but there seems to be more activity here so maybe someone will be able to help.

Car is F Type SVR 2018 (UK).

Initially, the car would not crank and there was only a click on starting. Got underneath the car and gave the starter a tap whilst my partner pressed the start button and it fired into life.
So booked in for a starter replacement. New starter fitted to car, now the mechanic is saying the engine cranks fine but it doesn’t actually fire up.
This is odd because the engine was working fine previously, I drove it to the workshop.
He has tested for a spark and apparently there’s no spark. But there’s also no codes stored.
He has sent me a video and it seems like when the cranking is manually stopped with the button, the car splutters a bit as if it’s only getting ignition when the starter motor stops getting power.

We have tried boosting the battery and jumping but still the same issue.

Any ideas/thoughts are welcome. Thank you!
 
Reply
Old Jan 31, 2025 | 06:20 AM
  #2  
Adam Deermann's Avatar
Senior Member
5 Year Member
Liked
Loved
Community Favorite
Joined: Oct 2018
Posts: 102
Likes: 73
From: The Netherlands
Default

Perhaps a starter relays?
 
Reply
Old Jan 31, 2025 | 06:29 AM
  #3  
JagCode3's Avatar
Senior Member
Community Builder
Liked
Loved
Community Favorite
Joined: Jun 2024
Posts: 556
Likes: 279
From: SacTown
Default

Fuel pump connector dislodged?
 
Reply
Old Jan 31, 2025 | 08:48 AM
  #4  
blitzsah's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2025
Posts: 4
Likes: 2
Default

Will be checking the Ignition relay tomorrow so will report back. Seems odd that this would fail though.
 
Reply
Old Feb 1, 2025 | 09:08 AM
  #5  
SportsEngineer's Avatar
Senior Member
Liked
Loved
Community Favorite
Joined: Feb 2024
Posts: 115
Likes: 40
From: San Francisco Bay Area
Default

Is it similar to this? My 2015 R RWD would fail to start as well. Turned out to be a loose ground strap on the chassis. Video in the link below:

https://www.jaguarforums.com/forum/f...9/#post2755874
 
Reply
Old Feb 1, 2025 | 10:47 AM
  #6  
blitzsah's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2025
Posts: 4
Likes: 2
Default

Originally Posted by SportsEngineer
Is it similar to this? My 2015 R RWD would fail to start as well. Turned out to be a loose ground strap on the chassis. Video in the link below:

https://www.jaguarforums.com/forum/f...9/#post2755874

No. The engine cranks but there is no spark now.
Initially, the problem was similar, but we confirmed that the starter motor was faulty. After replacement, now the engine won’t start but will crank.
 
Reply
Old Feb 4, 2025 | 02:49 PM
  #7  
DJS's Avatar
DJS
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: May 2013
Posts: 6,989
Likes: 2,663
From: Metrowest Boston
Default

Here’s a document on the starting system…
https://www.dropbox.com/scl/fi/fturj...=ns81kk9u&dl=0
 
Reply
Old Feb 5, 2025 | 03:58 AM
  #8  
bfrank1972's Avatar
Senior Member
Liked
Loved
Community Favorite
Joined: Nov 2021
Posts: 569
Likes: 297
From: Westport, CT
Default

As sports engineer mentioned, confirm your primary grounds on the car are all clean and secure. There are several on the car. May not be the issue but it is very easy to check. Can cause all sorts of issues - these are complex, computer driven cars, they're not your old Chevy BTW these do not have the traditional "starter relay" either. Also how old is your battery? If it is more than 5-6 years old, replace it.
 
Reply
Old Feb 15, 2025 | 10:14 AM
  #9  
blitzsah's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2025
Posts: 4
Likes: 2
Default

Update on this one. The starter that was used originally was bought via eBay, it was a denso starter with part number T2H3246
I found this from https://parts.jaguarlandroverclassic.../brand/jaguar/


The starter motor that came off the car had part number: GX73-11001-EC

The denso and the one that came off the car looked completely identical. Same number of teeth and kw rating etc.

I decided to source a second hand starter with the exact part number that came off the car.

After this one was fitted, car started no problem. So I’m not sure why, but the denso did not work, and it was a brand new part.
 
Reply
Old Feb 15, 2025 | 12:20 PM
  #10  
JagCode3's Avatar
Senior Member
Community Builder
Liked
Loved
Community Favorite
Joined: Jun 2024
Posts: 556
Likes: 279
From: SacTown
Default

Great detective work! Glad you are back up and running, thanks for letting us know the solution.





 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gooseman1107
XJ XJ6 / XJR6 ( X300 )
5
Nov 12, 2023 07:28 PM
oxendine
MKI / MKII S type 240 340 & Daimler
12
Jun 1, 2022 08:50 AM
MattsJag91
XJ40 ( XJ81 )
5
Jun 5, 2021 02:46 PM
semorex
XK / XKR ( X150 )
21
Jun 12, 2020 08:47 AM
vlaicu
XJ XJ6 / XJR6 ( X300 )
5
Sep 3, 2019 01:10 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:12 PM.