Vacuum hose location to tee off
Thread Starter
|
Senior Member
Joined: Mar 2022
Posts: 299
Likes: 269
From: Uk
Vacuum hose location to tee off
Hi need a bit of tech help please
will be fitting a snow stage 2 water meth kit and I need a boost pressure source that I can tee into rather then drill and tap the lid
Does anyone no a vac/manifold pressure hose location I can tap into
Tks
will be fitting a snow stage 2 water meth kit and I need a boost pressure source that I can tee into rather then drill and tap the lid
Does anyone no a vac/manifold pressure hose location I can tap into
Tks
Senior Member
Joined: Dec 2011
Posts: 675
Likes: 182
From: Atlanta, GA (Dunwoody)
I was going to answer this, but by looking at your pix on the HX thread, I see that you already drilled/tapped the plenum. For others who might be interested, I removed the symposer anyway, so I used that available port. I fabricated an aluminum blanking piece and tapped it for NPT to use for my mechanical boost gauge.
Thread
Thread Starter
Forum
Replies
Last Post
Mrs.grisby
S-Type / S type R Supercharged V8 ( X200 )
2
May 16, 2022 08:18 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)