Low beams do not always work properly
Thread Starter
|
Junior Member
Joined: Aug 2019
Posts: 4
Likes: 0
From: Saint Louis Missouri
Low beams do not always work properly
I have a 1994 XJS V12.
Whenever I turn the lights on, there is a possibility that the low beams will be very weak. If I turn on the high beams, everything lights up and after awhile if I go back to low beams, they will work properly. At other times, if I turn on the low beams, they work properly.
I have replaced the low beam relay switch, but that didn't resolve the problem. Any other ideas?
Whenever I turn the lights on, there is a possibility that the low beams will be very weak. If I turn on the high beams, everything lights up and after awhile if I go back to low beams, they will work properly. At other times, if I turn on the low beams, they work properly.
I have replaced the low beam relay switch, but that didn't resolve the problem. Any other ideas?
Joined: Dec 2011
Posts: 120,439
Likes: 17,014
From: Durham, UK
See the reply to your first posting of this question in XJS forum:
https://www.jaguarforums.com/forum/x...-first-221237/
If you wish to add further details or ask additional questions on the same topic, please use the same thread.
Graham
https://www.jaguarforums.com/forum/x...-first-221237/
If you wish to add further details or ask additional questions on the same topic, please use the same thread.
Graham
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
