When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New Member Area - Intro a MUSTNew to Jaguar Forums? Drop in and tell us about you, your ride and location. This is your chance to introduce yourself to the forum.
Hi All. First time Jag owner. Have an 06 X type 2.0 that I just love. Had a P1647 code after about 2 weeks. Have replaced the upstream O2 sensor. CEL will come on shortly after start. Clear the code and light goes away for thr trip only to return next time i start up. Any ideas? I have searched on the forum for a solution and apologies if this isnt the right area
Here's the extract from the Jaguar DTC lookup for P1647:
The reason the code comes back is you haven't fixed the cause. Of the 3 possible causes, Sensor failure can be discounted because you have replaced the Sensor. It's always possible to get a faulty new component but odds are against that. ECM failure can be discounted because there would be a long list of other codes and the vehicle would be unlikely to start. This leaves a harness/connector fault.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
Enjoy the forums.
Graham
Last edited by GGG; Nov 3, 2020 at 04:12 AM.
Reason: Typo
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
You may not be able to see this feature but if I click on a member's username, a drop down list opens with a option to View Public Profile - Statistics. This is what I see for you:
Shows your Last Activity as my Time Zone (GMT). I used the same feature to check the date for Ian Quintal.