New member
Hello. My names Luke and have been driving older Jaguars for over ten years. However I have a xj6 x350 giving me a headache and thought the advice from other enthusiastic folk may help. So basically the abs error dsc is on the dash and showing up lots of faults in the scanner after a read out. This last read out was done by a very reputable Jaguar Indie garage. They feel that the previous owner may have fitted the incorrect abs pump to the car. Not the incorrect for the car so to speak but one that doesn’t match the computer within that particular Jaguar xj6. We have already checked the electrical wiring and the abs sensors and replaced the steering wheel sensor. We also have checked battery voltage and the alternator also appears to be fine.If it is the case this has happened my question would be how would I source a abs pump that fits the car and works if I do not have the original number from the original abs pump ?
Welcome to the forums Luke,
Good to have you with us.
Follow this link https://www.jaguarforums.com/forum/x...-x350-x358-28/ to the X350 forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues. You can also use the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
Enjoy the forums.
Graham
Good to have you with us.
Follow this link https://www.jaguarforums.com/forum/x...-x350-x358-28/ to the X350 forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues. You can also use the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
Enjoy the forums.
Graham
Welcome to Jaguar Forums Luke,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Trending Topics
Welcome. Id suggest looking at Jaguars parts listing. If there are different part numbers (& programming set ups) for the pump then the vin breakdowns will be listed there. Then you would have the correct part number to search for. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Pete Type X
New Member Area - Intro a MUST
8
Mar 17, 2018 04:13 PM
Nobby
New Member Area - Intro a MUST
11
Sep 21, 2014 10:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)


















