No spark and low voltage at crank sensor circuit
Thread Starter
|
Junior Member
Joined: Feb 2019
Posts: 4
Likes: 0
No spark and low voltage at crank sensor circuit
My first post. Please soneone help me having issues with a 97 xj6 4.0 i bought yesterday. Was a no start from the door but i got it for 300 bucks so i didnt really care what it is. I charged up the battery and cranked it and it actually ran very rough for about 2 mins . I then scanned it and got code p1775. i seem to be intermittently getting no spark and hav replaced the crank sensor so far. I hate throwin parts at shitt for no reason but i was sure that was the issue. Now i get no starts at all and no spark. I am getting cranking rpms on the dash and the new crank sensor is ohm in spec. Although i am only getting 2.7 volts at the ckp sensor circuit. Could this be a bad ecm?! I already swapped relays . Please somebody point me in the right direction.
Joined: Dec 2011
Posts: 120,439
Likes: 17,003
From: Durham, UK
Welcome to the forum Mokejerz,
Good to have you with us at Jaguar forums.
Follow this link https://www.jaguarforums.com/forum/xj-xj6-xjr6-x300-26/ to the X300 forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Mid Atlantic Region forum by following this link https://www.jaguarforums.com/forum/us-mid-atlantic-65/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums.
Follow this link https://www.jaguarforums.com/forum/xj-xj6-xjr6-x300-26/ to the X300 forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Mid Atlantic Region forum by following this link https://www.jaguarforums.com/forum/us-mid-atlantic-65/ to find other members in your region.
Enjoy the forums.
Graham
Veteran Member
Joined: Mar 2014
Posts: 26,724
Likes: 10,282
From: Tehama County, California, USA
Hello,
$300 for anything that even slightly runs Isn't Bad!
GGG has directed you to the correct section where you can get help to get your Jag purring smoothly.
Welcome to the forums form ElinorB.
(';')
$300 for anything that even slightly runs Isn't Bad!
GGG has directed you to the correct section where you can get help to get your Jag purring smoothly.
Welcome to the forums form ElinorB.
(';')
Joined: Oct 2007
Posts: 120,950
Likes: 6,647
From: PHX some of the time
Welcome to Jaguar Forums Mokejerz,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Joined: Apr 2012
Posts: 25,811
Likes: 4,697
From: Summerville, South Carolina
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sorped1977
General Tech Help
0
Apr 7, 2018 04:24 PM
jakesdad
S-Type / S type R Supercharged V8 ( X200 )
19
Sep 9, 2016 04:24 AM
trosty
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
3
May 24, 2015 12:07 PM
MattSteele
X-Type ( X400 )
10
May 1, 2009 05:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)