Wet ecm
Thread Starter
|
Junior Member
Joined: Jul 2018
Posts: 9
Likes: 1
From: Hattiesburg ms
Wet ecm
Went through a drive-through car wash and water got in underneath the windshield on the passenger side and got my ECM box wet what can I do to solve this problem as inexpensive as possible help
Joined: Dec 2011
Posts: 120,439
Likes: 17,005
From: Durham, UK
Welcome to the forum Alvin,
Good to have you with us at Jaguar forums. Sorry to hear about the water ingress issue.
(I've removed your other post from a 7 year old thread in S-Type forum. A new thread in X350 forum is the place for this question.)
Has water got into the ECM and caused damage or is your question about how to seal the front screen to prevent this happening again?
Follow this link https://www.jaguarforums.com/forum/x...-x350-x358-28/ to the X350 forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Southern Midwest Region forum by following this link https://www.jaguarforums.com/forum/u...rn-midwest-67/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums. Sorry to hear about the water ingress issue.
(I've removed your other post from a 7 year old thread in S-Type forum. A new thread in X350 forum is the place for this question.)
Has water got into the ECM and caused damage or is your question about how to seal the front screen to prevent this happening again?
Follow this link https://www.jaguarforums.com/forum/x...-x350-x358-28/ to the X350 forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Southern Midwest Region forum by following this link https://www.jaguarforums.com/forum/u...rn-midwest-67/ to find other members in your region.
Enjoy the forums.
Graham
Last edited by GGG; Jul 4, 2018 at 02:14 AM.
Thread Starter
|
Junior Member
Joined: Jul 2018
Posts: 9
Likes: 1
From: Hattiesburg ms
Won't crank
after removing the ECM taking it out and drying it with a hair dryer I replaced it put it back in the car and reconnected it try to start the car and the car still wouldn't start I had to tow it to a local shop is this something that needs to be fixed by replacing the ECM or did I not allowed enough time to dry thanks
Trending Topics
Joined: Dec 2011
Posts: 120,439
Likes: 17,005
From: Durham, UK
Alvin,
I've merged the information you've posted in #1 and #7 and used it to start a new thread for you in X350 forum. Here's the direct link to it:
https://www.jaguarforums.com/forum/x...-crank-204353/
It does take a long time to dry modules thoroughly - I've known some members keep them in a stream of warm air for a few days. The worst thing to do is to attempt a start before you're sure the module is properly dried out.
Graham
I've merged the information you've posted in #1 and #7 and used it to start a new thread for you in X350 forum. Here's the direct link to it:
https://www.jaguarforums.com/forum/x...-crank-204353/
It does take a long time to dry modules thoroughly - I've known some members keep them in a stream of warm air for a few days. The worst thing to do is to attempt a start before you're sure the module is properly dried out.
Graham
Joined: Oct 2007
Posts: 121,000
Likes: 6,648
From: PHX some of the time
Welcome to Jaguar Forums Alvin,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Thread
Thread Starter
Forum
Replies
Last Post
mello12u
X-Type ( X400 )
2
Mar 29, 2015 06:01 PM
harryc
X-Type ( X400 )
8
Mar 24, 2015 02:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)