As the title reads, this is a modified center section from my 2010 XKR 5.0

I had some parts left over from my custom exhaust I built so I decided to clear out the shop a bit and put a little extra in the Christmas fund. Anyway, I can also remove the front silencer if buyer wants and either leave the extra O2 bungs that are right behind it or I can take those out. It will be shipped as a 3 piece and you can just clamp it together. Looking for 500$ shipped CONUS

 

 

Need the bungs in muffler not so much, I have al ready eliminated the rear mufflers with the Mina kit. The straight pies will just leave the resonators in font of the axle.
I am in Daytona Beach, 32118-3320 zip code.
386) 256-4305 home
386) 307-1059 cell and text
It's for a 2000 XKR

 

Not sure if it will fit a 2000, this is for 2010+

 

Bump before it goes to Ebay

 

fit a 2010 XF s/c you think?

 

Sorry, from what I can tell the XF system looks completely different

 

Nope this will only fit a 5.0L XK or XKR

 

Bump!

 

Hey bigdhenderson,just a few questions,
Did you get any cabin drawning/resonance and if yes at what rpm
From your experience what set up will not trigger the CEL
What's the set up now,straight pipes or it has the front silencer

Thanks in advance

 

I've never really had any drone with any of my setups except when the cats were removed. This piece has both resonators removed now, I should probably delete the first couple pics.

This setup will not trigger the CEL, the only thing that will do that's is removing/modifying the cats.

 

How loud is it w/o resonators, Is still 3pcs set up?How many clamps will I need and or it comes with it? I'm looking for somthing a little more aggressive then my stock 2010 XKR in dynamic mode.
Thanks

 

With this setup it should sound very similar to an XKR-S or XKR with the performance exhaust, so it will be more aggressive than your stock set up. I can supply the clamps for a bit extra or they could be sourced at a local store pretty easily... Should take 4 2.5" clamps total.

 

Bumppp!

 

My whole exhaust is 2.25 so a 2.5 crossover would make it breathe easier. So it might work. How much?

 

This is for the whole mid section, direct bolt in fit for 500$ shipped CONUS

 

Bump!

 

Any offers?

 

Materials alone on this are close to the asking price, not to mention labor and shipping. Your price is excellent, if I had a 2010, I'd be looking at this real hard.

 

I know it doesn't mean much but i am interested. I'm just waiting to see what happens with my '13 and the jag engineering team in england to rewrite software