I have a 2000 S-Type, 3.0 The previous owner removed the DCCV and plugged the 3 hoses that run along the passenger side inner fender (heater core??). He then looped the water pump hose to the water pump inlet/outlet so it bypassed everything else. Believe it or not I was able to drive the car all summer with working a/c.
Well, now I need heat. I know that I'll need to buy new hoses, because he butchered these. I already have a DCCV, but no idea of which hose goes to which inlet/outlet.
I have the JTIS and there is an excellent illustration of all the hoses conected to the DCCV but not where the other end terminates. I have searched this forum and everywhere else with limited results.
What I need is a photo/diagram to show me specifically where each of the 5 inlets/outlets on the DCCV start and terminate.
Anybody?
thanks,
Steve

 

See if this link helps

Link JagRepair.com - Jaguar Repair Information Resource

 

Gus, I already found and saved that excellent guide. It shows all of the hoses but not where they start and end.
Thank you very much for your help,
Steve

 

How about this?

 

Awesome!
that really helps. Now would anybody know the part #'s for ALL of the coolant hoses?
thanks again,
Steve

 

Look here http://www.drivehq.com/web/jfenley/P..._2000-2005.pdf page 636 (5)

 

Duh, I should have thought about looking in a collision guide. They have part #s and prices for everything.

Thanks guys, you've helped me immensely.

 

I wouldn't depend on those prices too much!

 

Use the links on the page.