jaguar parking break failure

Reply Subscribe

Thread Tools

Search this Thread

May 3, 2014 | 11:24 AM

keifmaane

Thread Starter

Junior Member

Joined: Apr 2014

Posts: 3

Likes: 0

From: virginia

jaguar parking break failure

when i try to drive the dash board says park break failure. when i drive i have to hold the park break up in order the park break to be off.

May 3, 2014 | 12:34 PM

Norri

Joined: Oct 2007

Posts: 121,051

Likes: 6,652

From: PHX some of the time

Try a reset.

1. Reset the EPB module:
a. Switch off the ignition.
b. Disconnect the battery for 30 seconds. For additional information, refer to STYPE
Workshop Manual Section 414-01.
c. Reconnect the battery.
2. Start the engine.
3. Firmly apply and release the footbrake five times.
4. Confirm that the message NOT CALIBRATED or APPLY FOOT AND PARK
BRAKE is displayed on the instrument cluster message center. This indicates that
the parking brake is in calibration mode.
5. Lightly press the footbrake pedal.
6. Apply the parking brake by using the EPB switch.
7. Release the parking brake.
8. Release the footbrake.
9. Confirm that the brake warning lamp is no longer illuminated on the instrument
pack and that the NOT CALIBRATED message is no longer displayed in the
message center.
10. Apply and release the EPB five times to ensure no error is present.