Green wire is the right channel, blue wire is the left channel, shields are common to both channels

 

Think i may have spliced into the wrong side of the AI-net connector! Kills the power to HU amongst other oddities, I spliced into the cable going to the HU..

 

The wires are very fine, I actually opened the Amp and spliced in at the board where the AI-Net cablecomes from the CD.

 

Here's what I did that didn't work. When I connected the wires from the Parrot harness it completely disabled the HU, no power at all. Any help appreciated!!

 

see page 13 on the attached file, the white wire you cut is the Bus Ground and the red wire you cut is the Bus data.....wounder why nothing works..LOL

You need the Green and Blue wire for the audio channels.

The attached is a very informative write up by another forum member.

 

In the rear of my 2019 jaguar XF there is a factory subwoofer what wires do I need two wire in my line Apple converter