X-Type ( X400 ) 2001 - 2009
Sponsored by:
Sponsored by:

Dashboard everything not reading

Thread Tools
 
Search this Thread
 
  #1  
Old 02-26-2018, 06:14 AM
Slownot's Avatar
Member
Thread Starter
Join Date: Dec 2017
Location: Preston, NW England
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default Dashboard everything not reading

Engine idling all okay with no issues , then suddenly all lights come on on dashboard , battery warning light etc etc on.
Rev counter showing nothing and fuel and temperature gauge just as though key in ignition 1 section
Checked voltage at battery just on 15v idling
Switched everything off and restarted all okay with gauges working correctly , happened again about ten minutes later.
I am a mechanic so I understand anything technical information , just wondering if there's a known cause before I dive in I've only had the car a few months and love it , thanks.
 
  #2  
Old 02-26-2018, 10:21 AM
avern1's Avatar
Veteran Member
Join Date: May 2012
Location: Winchester, CA
Posts: 3,290
Received 1,317 Likes on 1,004 Posts
Default

I would start with checking the connections and solder joints on the ignition switch. It is acting like you turned the key off. Is the engine shutting down or continuing to run?
 
  #3  
Old 02-26-2018, 11:03 AM
Slownot's Avatar
Member
Thread Starter
Join Date: Dec 2017
Location: Preston, NW England
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default

Engine is continuing to run perfectly throws up a fault code of P1642
 
  #4  
Old 02-26-2018, 11:56 AM
jeremys's Avatar
Senior Member
Join Date: Oct 2014
Location: Milton NJ. USA
Posts: 488
Received 73 Likes on 53 Posts
Default

looking at older threads it could be a loose connection at the CAN, which seems to be the communication circuit for other units like the Control Module as most people who reported this experienced other accompanying faults and restricted performance
Good Luck
 
  #5  
Old 02-26-2018, 12:59 PM
JagV8's Avatar
Veteran Member
Join Date: May 2009
Location: Yorkshire, England
Posts: 26,643
Received 4,483 Likes on 3,901 Posts
Default

P1642 looks to be a CAN error and with the faults I'd be looking for a chafed harness (or maybe a bad connector).

You might like to get codes from the other modules read in case that helps pinpoint where the fault probably is.
 
  #6  
Old 03-05-2018, 11:05 AM
Slownot's Avatar
Member
Thread Starter
Join Date: Dec 2017
Location: Preston, NW England
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default

Would that be at the connector that's tucked down on the os with a torn connector on it ?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ferrarix99
PRIVATE For Sale / Trade or Buy Classifieds
5
10-08-2012 09:52 PM
XJ40 Fixer
XJ40 ( XJ81 )
5
08-08-2012 08:33 AM
KAZsam
S-Type / S type R Supercharged V8 ( X200 )
12
06-09-2008 08:07 AM
EDLFWood
New Member Area - Intro a MUST
3
01-10-2008 01:13 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Dashboard everything not reading



All times are GMT -5. The time now is 12:25 PM.