X-Type ( X400 ) 2001 - 2009
Sponsored by:
Sponsored by:

How to adjust the jet wash of the windshield? FIXED

Thread Tools
 
Search this Thread
 
  #1  
Old 12-30-2011, 08:41 AM
Tony Oriente's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 9
Received 0 Likes on 0 Posts
Question How to adjust the jet wash of the windshield? FIXED

I own a X-Type 2.5 V6 of 2001. I'm very happy with my jaguar, but I have to fix some things.
The jets of the washer nozzles on the hood go on the roof rather than on the windshield. Please, can anyone tell me how to adjust them?
 
  #2  
Old 12-30-2011, 09:18 AM
MRomanik's Avatar
Veteran Member
Join Date: Sep 2009
Location: Salt Lake City UT USA
Posts: 1,424
Received 186 Likes on 161 Posts
Default

I had an 87 Porsche and the nozzles were adjustable using a straight pin. It is my understanding they are not adjustable on the Jag. Make sure they are properly seated in the hood.
 
  #3  
Old 12-30-2011, 12:30 PM
Tony Oriente's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 9
Received 0 Likes on 0 Posts
Default

Thanks for the answer. Actually a note of the handbook says that "the windscreen wiper jets and headlamp washer jets are not adjustable". However, I will try with a pin.
 
  #4  
Old 12-31-2011, 12:27 PM
rothe's Avatar
Senior Member
Join Date: Apr 2010
Location: about a 1/2 mile from the beach, NJ
Posts: 226
Received 23 Likes on 20 Posts
Default

Before you try to adjust anything and break it, try cleaning them. I've had other cars washers get partially clogged up, with the result being an improper spray pattern. Reaming out the hole with a strand of thin wire was usually enough to restore proper operation.
 
  #5  
Old 01-02-2012, 03:37 PM
pophen's Avatar
Senior Member
Join Date: Jan 2011
Location: Monmouth Co. NJ
Posts: 298
Received 31 Likes on 23 Posts
Default

I was able to adjust the washers on my '07 Xtype with a straight pin. A little movement make a big change in direction of the spray. Highway speeds change the direction of the spray also so you should take a ride before your done with the adjustment. Jack
 
The following users liked this post:
Tony Oriente (01-03-2012)
  #6  
Old 01-03-2012, 03:13 PM
Tony Oriente's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 9
Received 0 Likes on 0 Posts
Smile

I finally solved the issue. I used a syringe, hot water, vinegar, a needle and lots of patience. At first I injected hot water several times, both in the nozzles and around them. Then I injected the vinegar. So I injected hot water again. Finally with a needle I managed to adjust the two nozzles.
And to think that the handbook is written that the nozzles are not adjustable!!!
Thanks to all
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aholbro1
XJ XJ6 / XJR6 ( X300 )
17
08-05-2021 05:02 AM
HypnoGuru
XJS ( X27 )
11
10-23-2018 09:53 AM
Richard_gib
XJ6 & XJ12 Series I, II & III
16
09-12-2015 07:08 PM
Clamdigger
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
4
09-12-2015 03:43 PM
explorer364
XJS ( X27 )
3
09-11-2015 05:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: How to adjust the jet wash of the windshield? FIXED



All times are GMT -5. The time now is 12:39 PM.