Powertrain malfunction
Thread Starter
|
Junior Member
Joined: Dec 2011
Posts: 6
Likes: 0
From: Maryland
Powertrain malfunction
I just replaced the knock sensor and spark plugs on my 2004 2.5 with manual transmission. When I started the car I got a powertrain malfunction light. I was sure I put it all back together without missing anything but obviously something went wrong. Does anybody have any suggestions?
Thread Starter
|
Junior Member
Joined: Dec 2011
Posts: 6
Likes: 0
From: Maryland
I ran the codes and got a 2 of P0122, 2of P0222 and 1 of P1000. When I clear the codes one of each still remains. When I start the car and check the codes again I get the same 5 codes.
I solved the problem. There was a bent pin at the throttle body connection. It was barely noticeable but was enough to cause a lack of contact.
I solved the problem. There was a bent pin at the throttle body connection. It was barely noticeable but was enough to cause a lack of contact.
Last edited by JimL1947; Feb 5, 2012 at 05:50 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Donzi
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
8
Sep 23, 2015 03:06 PM
04, auto, car, jaguar, light, malfunctio, malfunction, malfunctions, p1000, power, powertrain, sensor, train, type, xtype
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
