Hello, I've replaced my reverse module as it had got wet sometime before I bought my Jag and had corroded inside. My plugs have also turned green and I need to either clean or replace. Can anyone help me with A, How to remove the corrosion or B, give me the name of the plug connectors so I can get new ones . Thank you

 

Sinbad, I would start with a can of contact cleaner. That should get most of what you are after off. From there, while tetious, you will end up sitting down with a small scribe and essentially scratching at each pin to get the corrosion off to restore the pins to a bright, silver finish.