Washer fluid level indicator
Thread Starter
|
Senior Member
Joined: Jan 2018
Posts: 105
Likes: 22
From: Noosaville Queensland
Washer fluid level indicator
G'Day from down under. X Type 3l auto 2005
The above indicator lights on the dash saying fluid level low. The is plenty of fluid so the level indicator I think is faulty. Could I just disconnect the wiring so the light will not come on or will this cause other electrical issues?
Thanks in advance,
David Bruce.
The above indicator lights on the dash saying fluid level low. The is plenty of fluid so the level indicator I think is faulty. Could I just disconnect the wiring so the light will not come on or will this cause other electrical issues?
Thanks in advance,
David Bruce.
Veteran Member
Joined: Mar 2017
Posts: 4,768
Likes: 794
From: Utah
Post # 2 to replace, not hard =
https://www.jaguarforums.com/forum/x...sensor-239160/
Seal =
C2S4061
@Yorta2 post #2, indicator #21 (click on the pic) I also get a message center text warning.
https://www.jaguarforums.com/forum/x...-light-188675/
https://www.jaguarforums.com/forum/x...sensor-239160/
Seal =
C2S4604
Unit =C2S4061
@Yorta2 post #2, indicator #21 (click on the pic) I also get a message center text warning.
https://www.jaguarforums.com/forum/x...-light-188675/
Last edited by Dell Gailey; Jun 5, 2022 at 04:22 PM.
Senior Member
Joined: Mar 2018
Posts: 347
Likes: 117
From: Nowra NSW Australia
Not my dash layout. I don't have that light, nor do I have the Cruise one (#20). My Cruise engaged is on the message text panel. Now I don't know if there should be those 2 lights, or not.... Bugger!
Thread
Thread Starter
Forum
Replies
Last Post
Northdevonlad
MKI / MKII S type 240 340 & Daimler
7
Jul 4, 2013 05:26 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)