XF and XFR ( X250 ) 2007 - 2015

AC vent

Thread Tools
 
Search this Thread
 
Old Aug 20, 2015 | 02:22 AM
  #1  
Parikshit Patodia's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2015
Posts: 12
Likes: 3
From: Mumbai
Default AC vent

Hey,
My right side AC vent doesn't open anymore. Has anyone faced a similar problem? Any help/suggestion on how I can fix it?
 
Reply
Old Aug 20, 2015 | 02:42 AM
  #2  
Parikshit Patodia's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2015
Posts: 12
Likes: 3
From: Mumbai
Default

The vent stays shut while the other vents open when I turn on the car. It opens automatically after a few minutes. Really confused. Any help will be much appreciated. Thanks.
 
Reply
Old Aug 20, 2015 | 09:17 AM
  #3  
DPK's Avatar
DPK
Veteran Member
Joined: Apr 2013
Posts: 3,115
Likes: 533
From: OKC, OK
Default

once they are all open..go into your menu and disable the feature..this way they stay open all the time....Less gizmos to break or leave you without air flow from that vent.
 
Reply
Old Aug 20, 2015 | 10:02 AM
  #4  
Blackcoog's Avatar
Veteran Member
Joined: May 2011
Posts: 1,099
Likes: 204
Default

The dash would have to be taken apart to fix it. Mine was fixed under warranty when it broke. The dealer replaced some components to fix it. I don't recall exactly what they replaced.
 
Reply
Old Aug 20, 2015 | 10:44 AM
  #5  
Norri's Avatar
Joined: Oct 2007
Posts: 121,045
Likes: 6,652
From: PHX some of the time
Default

Welcome to the forum Parikshit,

please try and post an intro in the new members section when you can, thanks!
 
Reply
Old Aug 21, 2015 | 10:09 AM
  #6  
Thor82's Avatar
Member
Joined: Aug 2014
Posts: 82
Likes: 16
From: Milwaukee
Default

Guys,
Does the ENTIRE dash have to be taken apart? I had one that took a **** just this morning it seems. I am guessing it is just a motor that needs to be replaced. That's a ridiculous design flaw to have to pull the dash just to replace when it's something anyone of us could see would eventually fail.
Also, how do you get into the menu to find the spot to disable the rotation?
-Thanks
 
Reply
Old Aug 21, 2015 | 10:57 AM
  #7  
DPK's Avatar
DPK
Veteran Member
Joined: Apr 2013
Posts: 3,115
Likes: 533
From: OKC, OK
Default

Originally Posted by Thor82
Guys,
.
Also, how do you get into the menu to find the spot to disable the rotation?
-Thanks
I have a MY 12 with a NAV screen..


Climate--> settings---> vent rotation always open (ON)


I set it like this from the first day I bought it...I don't need to see them opening for a thrill..Bad enough the shift knob pops up every time you start.




PS..I use to live by the Miller brewery on Wells.
 

Last edited by DPK; Aug 21, 2015 at 11:22 AM.
Reply
Old Aug 24, 2015 | 10:47 AM
  #8  
Blackcoog's Avatar
Veteran Member
Joined: May 2011
Posts: 1,099
Likes: 204
Default

Originally Posted by Thor82
Guys,
Does the ENTIRE dash have to be taken apart? I had one that took a **** just this morning it seems. I am guessing it is just a motor that needs to be replaced. That's a ridiculous design flaw to have to pull the dash just to replace when it's something anyone of us could see would eventually fail.
Also, how do you get into the menu to find the spot to disable the rotation?
-Thanks
No, you do not need to remove the dash. The long strip under the nav screen (wood trim) snaps in. Pull to remove that (disconnect the wiring that connects to it) and start removing bolts. It's fairly easy to figure out how to get the rest apart.
 
Reply
Old Aug 24, 2015 | 12:38 PM
  #9  
hlgeorge's Avatar
Veteran Member
Joined: Apr 2008
Posts: 3,472
Likes: 259
From: Atlanta, GA USA
Default

If it eventually opens then maybe it is just sticking. Spray a little silicone in the sides and see if it frees it up. It won't hurt it and is sure worth a try.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Justinb
E type ( XK-E )
3
Jun 21, 2023 05:29 PM
danke
XF and XFR ( X250 )
18
Mar 3, 2016 10:57 AM
John Fox
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
5
Sep 30, 2015 03:17 PM
the guardian
X-Type ( X400 )
2
Sep 25, 2015 03:06 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:52 PM.