XJ ( X351 ) 2009 - 2019

What are you intake temperatures? Supercharger cooling pump bad

Old Jul 9, 2021 | 08:09 PM
  #1  
AlexJag's Avatar
Thread Starter
|
Sponsor
10 Year Member
Liked
Loved
Community Favorite
Joined: Apr 2016
Posts: 1,344
Likes: 453
From: San Diego CA
Default What are you intake temperatures? Supercharger cooling pump bad

Trying to figure out if my supercharger pump is bad or not. logging some intake temperatures on hard runs they get up to 180 f
Anyone know if it's normal on these cars?
Now I am pushing 100 horsepower more with the tune still on my 08 XKR they don't go above 140
 
__________________
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.
Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
Reply
Old Jul 28, 2021 | 12:03 AM
  #2  
AlexJag's Avatar
Thread Starter
|
Sponsor
10 Year Member
Liked
Loved
Community Favorite
Joined: Apr 2016
Posts: 1,344
Likes: 453
From: San Diego CA
Default

I guess not a lot of ppl race or push their xj cars much
 
__________________
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.
Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
Reply
Old Jul 28, 2021 | 06:46 AM
  #3  
Rummy636's Avatar
Senior Member
Joined: May 2019
Posts: 329
Likes: 103
From: CT
Default

Are you logging intake air temp or the charge air temp?
 
Reply
Old Jul 29, 2021 | 12:02 PM
  #4  
clubairth1's Avatar
Veteran Member
15 Year Member
Community Builder
Community Influencer
Liked
Joined: May 2009
Posts: 12,147
Likes: 3,390
From: home
Default

I am never sure that I am data logging the correct sensor and have never figured it out?
The SC cars have 2 air temperature sensors and we are interested in the one after the SC.

But every scanner I have uses somewhat different abbreviations for each output.
I look for IAT and IAT2 but they don't seem to be the correct outputs??
.
.
.
 
Reply
Old Jul 29, 2021 | 07:08 PM
  #5  
AlexJag's Avatar
Thread Starter
|
Sponsor
10 Year Member
Liked
Loved
Community Favorite
Joined: Apr 2016
Posts: 1,344
Likes: 453
From: San Diego CA
Default

Just using one listed in torque pro is sufficient as its the sensor in the supercharger
 
__________________
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.
Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
Reply
Old Jul 29, 2021 | 07:09 PM
  #6  
AlexJag's Avatar
Thread Starter
|
Sponsor
10 Year Member
Liked
Loved
Community Favorite
Joined: Apr 2016
Posts: 1,344
Likes: 453
From: San Diego CA
Default

Originally Posted by Rummy636
Are you logging intake air temp or the charge air temp?
it reads as intake temp on torque pro . It goes up with boost so it's the sensor on the supercharger
 
__________________
2008 XKR Convertible, (mods: AlphaJagTuning ECU Tune , 1.5lb pulley, (200cel cats( are now melted), xpipe, Bosch 001 pump, 180 Thermostat.
Drag strip : 7.9sec 1/8mi 90 MPH . 1/4 mile 12.55 at 112.98mph
432rwh Dyno on Mustang Dynometer , Approx 511 crank HP.
2013 XJ 5.0 SC (Alpha Jag ECU, TCU tune, crank pulley), 600+ HP, 11.6 sec 1/4th mi 122mph, 7.6sec 1/8th mi
2018 Jaguar F-Type (AlphaJag ECU TCU, lower upper pulleys intake) 10.77 ,131mph ,700hp
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nsl1
XF and XFR ( X250 )
4
Jan 4, 2021 04:48 PM
domkacz
XK / XKR ( X150 )
3
Apr 14, 2017 03:38 PM
AlbBolivar
XJ XJ6 / XJR6 ( X300 )
5
Jun 15, 2015 09:46 AM
VanJaggerstien
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
15
Dec 23, 2014 08:18 PM
Drb007
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
3
Feb 10, 2014 07:21 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:51 AM.