After searching threads, I understand that CBC1448 is a mount. But, I also see MNA4250AA or AB as another mount. What gives?


Rockauto has the CBC cheap. Don't I also need the MNA mount? Assuming a dealer item.

 

Autohausaz.con

 

They are grommets.

You will need 2 of the CBC1448 for the top of the condenser and 2 of the MNA4250AB for the bottom.

Condenser and Receiver Drier-3.2/4.0 Litre - Parts For XJ Series from (V)720125 to (V)812255 (X300) | Jaguar Classic Parts UK

 

Thanks, parts ordered. I'll assume that installation is performed by removing the grille.

 

Probably also have to pull the top cover - 8 or 10 Torx screws in the engine bay, up front near the hood hinges. You may want to replace your radiator iso-mounts while you are at it. (4 pcs, all the same p/n, I believe Rock has them)


A second person is handy, though not necessary for re-assembly. Nice to have someone up front guiding the condenser upper pins into the grommet as you lower the panel back into place - it can be a bit fiddly fitting it over new radiator iso's.