Recently had the passenger side seat stop working all together. Took off the controls and tested it on the drivers side. Works fine on that side. What would be the item to fix. The seat is in the most uncomfortable spot and would like to have all electronics in working order.

 

Check the fuses in the heel boards first.

 

Check all the fuses. None are blown

 

Try the seat control module, it's bolted under the seat base in an xk8. Probably the same in your car.

 

Sorry, just noticed you have a ford.. You should probably ignore my advice!

 

No I have a 97 xj6 but I think I will buy a used module and that should do the trick hopefully

 

First try swapping the modules, no sense in spending money needlessly.

 

Is it simple to take out. How do u do so?

 

I just looked at mine. If the seat is all the way back you probably can't get at the rear screws, otherwise you just need to remove the four torx head screws to take the seat out.

 

Torx 50, I believe

 

The seat is all the way back. I guess I'm going to have to fight with it