Anybody have some insight on where I can get the specs for the cam locking tool for the 2001 XJ8. I've got somebody that I showed a picture of it to and they think they could make a set for me.

 

There are not specifications that I know of. It is really a simple fixture that can be made with a piece of angle iron, washers and three bolts.

Make it and post the results.

 

I was actually thinking of taking a good piece of seasoned oak and whipping that piece up.....

 

That's actually a great idea! I've got a shop full of oak and maybe even some walnut I could use. Any idea on what the bolt sizes and center are? I suppose it would also be helpful to know what the offset on the legs are.

 

Maybe that is of help...
http://www.jag-lovers.org/snaps/snap...?id=1242243983

 

Did some picture search...
The shape of the original cam locking tool is quite a challenge to reproduce.









But seeing the following kit It shouldn't be too complicated. The tool could be shaped much more straight forward...





In the process of my search I found another VERY detailed DIY for the timing chain job with lots of pictures...

http://www.calguns.net/calgunforum/s...d.php?t=368514

HTH,

David

 

Many thanks DavidN for the links you posted....great Jaguar foto show on.....a gun site?