I replaced drivers door exterior door handle....now drivers window only clicks at the motor...all others work...any ideas...please and thank you

( 1998 XJ8 - added by GGG )

 

I've moved your question from Jaguar Forums Feedback & Suggestion Center to X308 forum. Members here with the same model will be able to help.

Graham

 

Thx.....sorry

 

Yes, what you need to do is take the door panel back off and disconnect the door ECU and then reconnect it back up. Chances are you might've nudged the ECU a bit and that was enough to have a loose connection from the plug. I've done it myself.

 

Is the ECU the main door harness on backside of door panel?

 

Don't forget to do a battery 'hard reset' after that, will not work without that, and strange things and mix up will happen.

 

The ECU is located inside the door itself. Big grey box. Disconnect and reconnect then do the hard reset as suggested.

 

Thanks everyone . ....it worked great ! !!