Can anyone tell me what thread A XJ series II uses for wheel nuts? Thanks

 

Memory again, 1/2" National Fine.

Also called UNF in some areas.

 

Otherwise known as ½-20

Cheers
DD

 

Cheers first the info much appreciated

 

One final question on this open or closed end nut?

 

.50" x 20°

 

Jaguar typically used a closed nut with alloy wheels and open nut with steel wheels.

But, some of the 'closed' nuts were actually open nut with a bright stainless steel cap crimped on....and usually with a pre-installed washer.

What wheels are you using?

Cheers
DD

 

20º ?

The thread size is ½-20 with the '20' being 20 threads per inch

Cheers
DD

 

I was always told, it was a 20° pitch.

I shall investigate.

 

Steel chrome smoothies as a replacement for 15" lattice I was told I couldn't use the same nuts off the alloys does this sounds tight?

 

*Right

 

My aplogies for spreading missinformation.

 

Yes, that is correct.

Cheers
DD