Well, everything worked perfect for a day or two :-).

On cold start up, loud "ticking" noise (not a lifter), almost sounds like metal "clacking" on metal, but isn't. Only does it first start, will not do it if I start, shut down, and re-start. Runs great once it starts.
Might even be arcing in ignition, but I do not have a clue at this point. Anyone have a guess?

 

? model; ? engine: ? year

 

Checked your oil level?

 

10.5 fresh new was mate.

 

stops the very split second engine starts. Only makes noise while turning over to start.

 

92, 5.3,xjs

 

So if you disconnect the fuel relay (forcing a no start) will you get the noise continually as long as the starter is cranking ?

 

Thinking it may be the Bendix not engaging fully. Will check that this weekend and let everyone know if that is it.

 

A tooth missing from the ring gear (not so common).

The Bendix is slipping (sort of common).