blower motor went out - 2008 XKR

Reply Subscribe

Thread Tools

Search this Thread

Aug 13, 2015 | 10:29 PM

#21

Booskisjag

Junior Member

Joined: Jun 2015

Posts: 17

Likes: 0

From: MD

Can anyone tell me where the BCM is located

Aug 26, 2015 | 06:46 PM

#22

Booskisjag

Junior Member

Joined: Jun 2015

Posts: 17

Likes: 0

From: MD

Quote:

Originally Posted by Dan

I had my Jag in at the dealer for an airbag light which turned out to be the passenger seat belt buckle. After two weeks of waiting for the repair I pick it up and now the heater/ac motor suddenly doesn't work!

They state it's a $1,700 repair for the fan motor and resistor!! I'm wondering why all of sudden it goes out on their watch and why the hell the repair is so costly.

Anyone have this motor go out?

Dan I took out the motor and sent 12v to it as well and it doesn't spin so do u think this is my original problem

Aug 26, 2015 | 06:47 PM

#23

Booskisjag

Junior Member

Joined: Jun 2015

Posts: 17

Likes: 0

From: MD

Aug 31, 2015 | 05:22 PM

#24

GreyXK

Senior Member

Joined: Jan 2011

Posts: 104

Likes: 15

From: Carolina

Quote:

Originally Posted by FrickenJag

Update, my R1 relay is good. After speaking with a tech, it appears the Blower motor control module when replaced has to be programmed...? I've never seen this personally. 115$ or so to programmed and diagnose at Charlotte Jag.

I need to buy the IDS module for future.

I think I'm the guy with the original Airtex problem on another thread. It did not correct the problem when I installed it. Charlotte Jag is where I finally had to have the problem fixed to the tune of about $500 for the control unit and 15 minutes of tech installation. No one mentioned reprogramming. But then they're...