crank case position sensor

Reply Subscribe

Thread Tools

Search this Thread

Oct 27, 2021 | 07:27 PM

stevepaa

Thread Starter

Senior Member

Joined: Mar 2010

Posts: 904

Likes: 184

From: san jose

crank case position sensor

So I am finally finishing my head job and start putting heads back on block. And I cannot find the little bolt to hold the crank position sensor. Anyone have a parts diagram for it?
thanks

Oct 27, 2021 | 07:50 PM

motorcarman

Joined: Dec 2009

Posts: 13,647

Likes: 9,583

From: Wise County,TX

I'm thinking it is a simple M6 x 1.00

Last edited by motorcarman; Oct 28, 2021 at 08:26 AM.

Oct 28, 2021 | 05:07 AM

GGG

Joined: Dec 2011

Posts: 120,439

Likes: 17,005

From: Durham, UK

Quote:

Originally Posted by motorcarman

I' thinking it is a simple M6 x 1.00

+1

Can't be anything other than a standard size when there's no entry for it in JEPC:

Graham

Oct 28, 2021 | 08:28 AM

motorcarman

Joined: Dec 2009

Posts: 13,647

Likes: 9,583

From: Wise County,TX

I have even swapped them for a 10mm hex head M6 x 1.00mm to replace the T30 TORX because an open end wrench is easier to get behind the steering rack.