Recently I had been posting to a thread asking how I had converted by front fog lights to daytime running lights, and also achieved sequential turn signals. I had found the proceedure on another thread here on the forum, and could not now relocate the thread. Here are pix of the fuse box conversions with the 'jumper' wires connecting the 2 different relays. a small resister in placed in the line to the turn signal relays, and a one-way diode is inline for the fog lights.
The first pix is of the front fuse box under the hood, and the 2nd is from the trunk fuse box.
I know someone here has the complete procedure



Front fuse box with relays removed to show position of the jumper wire.


Rear fuse box with relays removed to show wire connecting locations(clean up ends first.
and schematics, I just could not find it. If anyone needs more info let me know and I will try to provide it.

 

"a small resister in placed in the line" is actually a DIODE.

 

You are likely correct. Obviously, 'Electrical Engineering' is not my strong suit( I prefer blue linen).