XK8 / XKR ( X100 ) 1996 - 2006

Need exhaust '02 XKR

Thread Tools
 
Search this Thread
 
Old Jul 16, 2009 | 09:30 AM
  #1  
wcben's Avatar
Thread Starter
|
Member
15 Year Member
Liked
Joined: Jul 2008
Posts: 90
Likes: 8
From: Fort Lauderdale FL.
Default Need exhaust '02 XKR

ok..the passenger side rear resonator has sprung a leak on my XKR. I figure it's time to do the whole system.....I've been trying to find the Borla system as I've had their systems before (on other vehicles) and really liked them but, apparently, it's been discontinued and, can't be found. I don't like the idea of under the axle, and, don't trust most of the mechanics down here (south Florida)as i don't want my car sounding like a Japanese tuner or, a mustang....it needs to be refined but a good growl when playing would be ok...

Any advice?
 
Reply
Old Jul 16, 2009 | 10:56 AM
  #2  
wazari's Avatar
Senior Member
Joined: Jun 2007
Posts: 261
Likes: 14
From: California
Default

http://www.minagallery.com/jagxp/XK8_Exhaust_page.htm
 
Reply
Old Jul 16, 2009 | 01:15 PM
  #3  
wcben's Avatar
Thread Starter
|
Member
15 Year Member
Liked
Joined: Jul 2008
Posts: 90
Likes: 8
From: Fort Lauderdale FL.
Default

Thanks but, Mina doesn't have it (Borla), don't think they can get it....same thing with The Driven Man. The Arden's more than I was hoping to spend.
 
Reply
Old Jul 16, 2009 | 01:50 PM
  #4  
govatos's Avatar
Senior Member
Joined: Oct 2008
Posts: 262
Likes: 15
From: Vienna, VA
Default

I'm putting a new exhaust on my 06 xkr and may have the oem pieces if that will help you.
 
Reply
Old Jul 16, 2009 | 03:52 PM
  #5  
wcben's Avatar
Thread Starter
|
Member
15 Year Member
Liked
Joined: Jul 2008
Posts: 90
Likes: 8
From: Fort Lauderdale FL.
Default

Thanks, I'd be very interested, but are they compatible?
 

Last edited by wcben; Jul 16, 2009 at 04:18 PM.
Reply
Old Jul 17, 2009 | 11:09 AM
  #6  
govatos's Avatar
Senior Member
Joined: Oct 2008
Posts: 262
Likes: 15
From: Vienna, VA
Default

I don't know if they are compatible. Need some of the more knowledgable folks on here to weigh in on that one.
 
Reply
Old Jul 17, 2009 | 09:54 PM
  #7  
smith_mike's Avatar
Member
Joined: Mar 2009
Posts: 41
Likes: 6
From: California
Default

I have the Mina. It's under the axle. I have found no clearance problems at all. Under the axle is a straight shot. The Mina is highly polished stainless and sounds great. It is more expensive than some though.
 
Reply
Old Jul 18, 2009 | 12:50 AM
  #8  
wcben's Avatar
Thread Starter
|
Member
15 Year Member
Liked
Joined: Jul 2008
Posts: 90
Likes: 8
From: Fort Lauderdale FL.
Default

I was really hoping to find a Borla system but, no one can get it, does anyone have an idea where I can find a system in stock?
 
Reply
Old Jul 18, 2009 | 07:52 AM
  #9  
JgaXkr's Avatar
Veteran Member
15 Year Member
Liked
Loved
Community Favorite
Joined: Mar 2008
Posts: 1,696
Likes: 283
From: Boston Mass
Default

Try Atlantic Brittish @ 800-533-2210 speak with Scott @ xt 120 They used to supply me with Borla systems.
 
Reply
Old Jul 18, 2009 | 10:45 AM
  #10  
Eroc's Avatar
Member
Joined: Jan 2009
Posts: 59
Likes: 4
From: NORMAL,IL
Default

There may be a few borla systems around...try contacting borla themselves...they probably have a toll free number on their website...i chose the mina and it looks awesome...the sound wasn't bad but needed more i thought...after alot of craziness...i put the magna flow crossover (x) pipe on (removed the center resonator) and got exactly what i was hoping for.....purrrrfect....good luck
 
Reply
Old Jul 18, 2009 | 07:58 PM
  #11  
wcben's Avatar
Thread Starter
|
Member
15 Year Member
Liked
Joined: Jul 2008
Posts: 90
Likes: 8
From: Fort Lauderdale FL.
Default

I've spoke with Borla, Mina and " The Driving Man", none of them have and told me they can't get the Borla system anymore, I've had Borla on other vehicles and really like the sound, build and installation.
 
Reply
Old Sep 19, 2009 | 12:19 AM
  #12  
tonycottrell's Avatar
Member
Joined: Feb 2008
Posts: 34
Likes: 1
From: North Carolina
Default

I'm about ready to pull the trigger and order the QuickSilver Exhausts system for the XK8 in my garage. I've been wanting it for quite some time. My local Aston Martin dealer will order it and install it. They've been putting a few on Aston Martins.

http://www.quicksilverexhausts.com/p...996-05/145.htm

Tony Cottrell
Winston Salem, NC

97 XK8
05 XJ8 L
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kj07xk
XK / XKR ( X150 )
4
Dec 18, 2025 10:56 AM
GordoCatCar
XK8 / XKR ( X100 )
4
Jan 2, 2017 01:10 PM
Tim Goz
XK8 / XKR ( X100 )
2
Sep 17, 2015 09:11 AM
tampamark
XK / XKR ( X150 )
4
Sep 14, 2015 09:12 PM
LondonXK8Boy
XK8 / XKR ( X100 )
3
Sep 14, 2015 08:26 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:39 PM.